
Perth, Western Australia
Water Damage Restoration in Perth
Water damage restoration in Perth for burst pipes, roof leaks, floods and sewage: we extract the water, dry the structure with measured moisture readings and give you the records your insurer needs.
- Water extraction, structural drying and mould treatment
- Moisture readings and photos to support insurance claims
- Clean water, grey water and sewage handled
- Homes, rentals, strata and businesses across Perth
Water you can see is the easy part. The water you can't see is what turns into swollen cabinets, lifting floors and mould.
Water damage in a Perth home rarely stays where it starts. A split flexi hose, a box gutter overflowing in a winter front or a backed-up floor waste sends water under skirting, into the base of double brick walls and through underlay into the slab. What you can see is usually the smallest part of the problem.
We extract the water, map where it has travelled with moisture readings, remove only what cannot be saved and dry the structure until the numbers say it is dry. Every step is photographed and logged, so your insurer, strata manager or builder can see exactly what happened and what was done.
What we do
Our Water Damage Services in Perth

Emergency Water Extraction
Standing water pumped and extracted from floors, carpets and slabs before it soaks in further.
Learn more →
Flood Damage Restoration
Full clean-up and restoration after floodwater, storm runoff or major internal flooding.
Learn more →
Burst Pipe Water Damage
Drying and repair prep after burst supply pipes, leaking flexi hoses and hot water system failures.
Learn more →
Wet Carpet Drying
Carpet and underlay extracted, dried in place where possible, and sanitised to stop odour.
Learn more →
Structural Drying
Dehumidifiers, air movers and cavity drying for slabs, brick walls, cabinetry and ceilings.
Learn more →
Mould Removal
Mould removal and remediation after leaks and damp, with the moisture source found and fixed.
Learn more →
Sewage Cleanup
Category 3 cleanup after sewer backups and toilet overflows, done safely with PPE and sanitising.
Learn more →
Storm Damage and Roof Leaks
Ceiling, wall and carpet drying after storms, overflowing gutters and roof leaks.
Learn more →Problems we fix
What Types of Water Damage Do We Handle in Perth?
Burst pipes and flexi hoses
A failed flexi hose or split pipe can release a lot of water fast. Property owners are responsible for pipes from the water meter to the home (Water Corporation); we dry what the leak soaked. More on burst pipe water damage.
Roof leaks and overflowing gutters
Box gutters and blocked downpipes overflow into ceilings during heavy rain. We dry the ceiling cavity, insulation and the rooms below. More on storm damage and roof leaks.
Washing machine and dishwasher overflows
Appliance water is classed as grey water under the IICRC S500 standard, so underlay is usually replaced and carpet sanitised. More on wet carpet drying.
Toilet and sewer backups
Sewage is Category 3, the highest contamination level. Porous materials are removed and every surface cleaned and sanitised before drying. More on sewage cleanup.
Stormwater coming inside
Overland flow and drains backing up bring outside water in under doors. It is treated as contaminated and needs cleaning as well as drying. More on flood damage restoration.
Mould after a leak
Mould grows where moisture is left behind. WA Health advises fixing the moisture source, since cleaning alone will not stop regrowth (Healthy WA). More on mould removal.
Property types
What Types of Properties Do We Restore?
Houses on concrete slabs
Most Perth homes are double brick on a slab (UDIA WA). Slabs and brick hold water longer than timber frame, so drying is measured, not guessed.
Apartments and strata
Water often crosses lot boundaries in strata. We document the source and the affected lots so owners, strata managers and insurers can sort out responsibility.
Rental properties
We work with property managers, landlords and tenants, and can provide written reports on cause and work done for the bond and insurance trail.
Shops, offices and commercial premises
We plan drying around trading hours where possible and contain work areas to keep the rest of the premises open.
Why us
Why Perth Homeowners Call Us After Water Damage
Moisture readings, not guesswork
Water travels further than it looks. It wicks up plaster, runs under skirting and soaks into the underlay beneath dry-looking carpet. Every job starts with moisture readings across the affected rooms and the rooms next to them, so we dry what is actually wet and stop when the readings say the structure is dry, not when it feels dry. The IICRC S500 standard, the reference most Australian restorers and insurers work from, sets drying goals by measured moisture rather than by touch.
Paperwork your insurer can use
Most water damage in Perth ends up as an insurance claim, and claims move faster with evidence. We photograph the damage before anything is moved, record the cause, log readings each visit and note what was removed and why. That record matters: the Insurance Council of Australia notes that insurers may assess how water entered a home to decide which part of a policy applies (ICA).
Built around Perth homes
Perth builds differently to the eastern states. Most homes here are double brick on a concrete slab, which means water sits in the cavity and the slab rather than draining through a timber subfloor. Drying a double brick wall or a slab takes different equipment and more time than a stud wall (UDIA WA notes that double brick dominates Perth housing construction). We plan the drying around how your home is actually built.
Act early
Get Your Free Quote Today
Water keeps moving after the leak stops. It wicks up plaster, runs under skirting and soaks into underlay and slabs. Under the IICRC S500 standard, clean water can be upgraded to a higher contamination category the longer it sits, which means more has to be thrown out.
Getting extraction and drying started early is the single biggest factor in the final cost. Tell us what happened and we'll call you back.
Prefer to talk? (08) 6263 6253
How we work
Restoration Done by the Numbers, Not by Feel
Water Damage Restoration Perth handles water damage restoration across the Perth metro area: emergency extraction, structural drying, mould removal and sewage cleanup.
Every job is measured with moisture readings from the first visit to sign-off, and documented so your insurer, strata manager or builder can see exactly what was wet, what was removed and when it was dry.
Service area
Proudly Serving Perth and Surrounding Suburbs
Northern suburbs
Joondalup, Wanneroo, Clarkson, Butler, Alkimos, Hillarys, Duncraig, Scarborough, Karrinyup, Balcatta, Osborne Park, Wangara, Malaga, Ellenbrook
Eastern suburbs and Hills
Midland, Bassendean, Morley, Bayswater, Belmont, Forrestfield, Kalamunda, Mundaring, Maida Vale, High Wycombe
Inner and western suburbs
Perth CBD, Subiaco, Leederville, Mount Lawley, Victoria Park, South Perth, Nedlands, Claremont, Cottesloe, Mosman Park
Southern suburbs
Fremantle, Melville, Willetton, Canning Vale, Thornlie, Gosnells, Armadale, Cockburn Central, Success, Kwinana, Rockingham, Baldivis
Not listed? See all areas or call to check your suburb.
Frequently asked questions
What should I do first when I find water damage?
Stop the water at the source or the mains tap, turn off power to wet areas if it is safe, move valuables off the floor and take photos. Then call a restorer and let your insurer know.
How long does water damage restoration take?
Extraction usually happens on the first visit. Drying takes longer and depends on how much water got in, how long it sat and what the home is built from. Slabs and double brick dry more slowly than timber frame. We take readings at each visit and sign off when they show the structure is dry.
Do you work with insurance companies?
Yes. We provide photos, moisture readings and a record of the work for your claim. Your insurer decides what is covered, so contact them early and keep damaged items until they say you can dispose of them.
Is water damage covered by home insurance?
Many policies cover sudden water escape such as a burst pipe, and most cover storm damage. Flood cover varies. Flood has a standard definition in Australian policies but storm does not, so read your product disclosure statement and ask your insurer.
Can water-damaged carpet be saved?
Often, if the water was clean and extraction starts quickly. Carpet soaked by sewage or outside floodwater is usually replaced for health reasons.
Will I get mould after water damage?
Mould grows where moisture is left behind. Fast extraction and proper drying, confirmed with moisture readings, is the best way to prevent it.
Which areas do you cover?
The Perth metro area, from the northern suburbs through the inner city and Hills to the southern suburbs. See the areas page for the suburb list, or call to check your suburb.
Got water where it shouldn't be?
Water damage gets worse by the hour. Call now or send your details and we'll call you back.
Call (08) 6263 6253