Water Damage Restoration across Perth Metro · Insurance Claim Reports · Free Quotes
Burst pipes · Floods · Roof leaks · Mould · Sewage  |  Clean, grey and black water handled across Perth metro

Water Damage Questions, Answered

Straight answers to the questions Perth homeowners ask most about water damage restoration, drying, mould and insurance, with sources where it matters.

What is water damage restoration?

Water damage restoration is the process of removing water from a building, drying the structure back to normal moisture levels, cleaning and sanitising where needed, and preparing the area for repairs. It is different from cleaning: the goal is a dry, safe structure, confirmed with moisture readings.

Can water damage be repaired?

Most water damage can be repaired if it is dealt with quickly. Hard materials such as tiles, brick and concrete can usually be dried. Plasterboard, particleboard cabinetry, carpet underlay and anything soaked by sewage are more often replaced. Speed matters, because water keeps spreading and clean water can become contaminated as it sits.

How can you tell if water damage is permanent?

Signs that a material will need replacing include plasterboard that is soft, swollen or crumbling, particleboard that has swelled at the edges, timber floors that have cupped badly and not settled after drying, and any porous material soaked by sewage. Stains alone do not always mean replacement: a stained ceiling that has kept its shape can often be dried and repainted.

What are the categories of water damage?

The IICRC S500 standard uses three categories based on contamination. Category 1 is clean water from a sanitary source such as a burst supply pipe. Category 2 is grey water with some contamination, such as washing machine overflow. Category 3 is grossly contaminated water such as sewage or outside floodwater. The category decides what can be saved and what safety steps are needed.

What are the classes of water damage?

Separate from category, the IICRC S500 standard uses four classes to describe how much water has been absorbed and how hard the area will be to dry. Class 1 is the least water and evaporation load; Class 4 covers materials with low porosity that hold water deeply, such as concrete, brick and hardwood, which need specialist drying.

Is water damage expensive to repair?

Costs vary widely with the size of the area, the water category, how long the water sat, the materials involved and how many days of drying are needed. Acting quickly is the most effective way to keep costs down, because extraction early reduces how much has to be removed and how long equipment runs.

How long does it take to dry a house after water damage?

There is no fixed number of days. Carpet and plasterboard dry faster than concrete slabs and double brick, which are common in Perth. A professional restorer measures moisture at each visit and finishes when readings match unaffected areas of the home.

Who is responsible for a burst pipe in Perth?

Water Corporation maintains the water service up to and including the meter outlet. The property owner is responsible for pipes from the meter to the home and inside it (Water Corporation). In strata schemes, check the strata plan and by-laws.

What is the insurance definition of flood?

Since June 2012, Australian home and contents, small business and domestic strata policies use a standard definition of flood: the covering of normally dry land by water that has escaped or been released from the normal confines of a lake, river, creek or other natural watercourse, or a reservoir, canal or dam (Insurance Council of Australia). Rainwater runoff may be covered under storm instead.

Should I get mould tested?

Usually not. WA Health states that sampling is not needed to decide the health risk; any mould or dampness should be treated as a potential risk and fixed promptly (Healthy WA).

Should I run fans to dry water damage?

Fans alone can make things worse by moving damp air into other rooms. Professional drying pairs air movers with dehumidifiers so moisture is lifted off surfaces and then removed from the air.

Can I stay in my home during drying?

Usually yes. Drying equipment is noisy and runs continuously, but most people stay at home. Sewage contamination, extensive mould or unsafe ceilings may mean staying out of the affected area until it is cleaned.

General information only. For your situation, call us or talk to your insurer.

Still got questions? We'll call you

We'll call you back to talk through the damage and next steps. By submitting you agree to our privacy policy.

Got water where it shouldn't be?

Water damage gets worse by the hour. Call now or send your details and we'll call you back.

Call (08) 6263 6253